Diagnosis Procedure

TELESCOPIC MOTOR


Description

- The telescopic motor is installed to the steering column assembly.
- The telescopic motor is activated with the automatic drive positioner control unit.
- Compresses the steering column by changing the rotation direction of telescopic motor.





TELESCOPIC MOTOR


Diagnosis Procedure

1.CHECK TELESCOPIC MOTOR POWER SUPPLY
1. Turn ignition switch OFF.
2. Disconnect telescopic motor connector.
3. Turn the ignition switch ON.
4. Perform "Active test" ("TELESCO MOTOR") with CONSULT-III
5. Check voltage between telescopic motor harness connector and ground.





Is the inspection result normal?
YES - Replace telescopic motor. (Built in steering column assembly.)
NO - GO TO 2.
2.CHECK TELESCOPIC MOTOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect automatic drive positioner control unit.
3. Check continuity between automatic drive positioner control unit harness connector and telescopic motor harness connector.





4. Check continuity between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES - Replace automatic drive positioner control unit. Removal and Replacement.
NO - Repair or replace harness or connector.