Crankshaft Main Bearing

Main Bearing Cap Torque & Sequence

Tighten lower cylinder block as follows:





Tighten M8 bolts in numerical order as shown from No. 17 to 24.

Bolts 17 - 24 : 22.1 N.m (2.3 kg-m, 16 ft-lb)

NOTE: There are more processes to complete the tightening bolts. However stop procedure here to install rear oil seal.

Restart tightening of lower cylinder block bolts as follows:





- Tighten M10 bolts in numerical order as shown from No. 1 to 16.

NOTE: Use TORX socket (size E14) for bolts No. 1 to 16 (M10 bolt).

Bolts 1 - 16 : 35.3 N.m (3.6 kg-m, 26 ft-lb)





- Turn M10 bolts 90� clockwise in numerical order from No. 1 to 16 using Tool.

Tool number : KV10112100 (BT-8653-A)



MAIN BEARING






Undersize






Main Bearing Oil Clearance