Lighting and Horns: Service and Repair

ILLUMINATION


Removal and Installation


ILLUMINATION CONTROL SWITCH

Removal





The illumination control switch (1) is replaced as a part of the combination meter assembly. Service and Repair.

Installation
Installation is in the reverse order of removal.

CARGO/PERSONAL LAMP

Removal





1. Using a suitable tool (A), release the pawls and remove the cargo/personal lamp lens (1).

Broken circle indicates: Pawl

CAUTION:
Wrap a cloth around tool to protect the housing and lens.
2. Remove cargo/personal lamp screws (2).
3. Disconnect the connector, then remove cargo/personal lamp.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Using a suitable tool, release the pawls and remove the cargo/personal lamp lens.





2. Release the cargo/personal lamp bulb retainers (1), then pull bulb (2) straight out to remove.

Cargo/personal lamp bulb : 12V - 8W

AT FINISHER LAMP

Removal
1. Remove AT finisher from center console. Removal And Installation.





2. Rotate AT finisher lamp socket (2) with bulb (3) counterclockwise, then pull away from finisher (1).

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove AT finisher from center console. Removal And Installation.





2. Remove AT finisher lamp socket (1), then pull bulb (2) straight out away from socket.

AT finisher lamp bulb : 12V - 3W