Removal And Installation Without Intelligent Key System

NATS ANTENNA AMP.


Removal and Installation


NATS ANTENNA AMP

NOTE:
- If NATS antenna amp. is not installed correctly, NVIS (NATS) system will not operate properly and "SELFDIAG RESULTS" on CONSULT -III screen will show "LOCK MODE" or "CHAIN OF IMMU-KEY"
- Initialization is not necessary when only the NATS antenna amp. is replaced with a new one.

Removal
1. Disconnect the battery negative terminal.
2. Remove the cluster lid A. Removal And Installation.





3. Remove the bolt, disconnect the electrical connector, and remove the NATS antenna amp.

Installation
Installation is in the reverse order of removal.