Basic Inspection Without Intelligent Key System

PRE-INSPECTION FOR DIAGNOSTIC


Basic Inspection

1.INSPECTION START
Turn ignition switch "OFF".

NOTE:
Before starting operation check, open front windows.
- GO TO 2.
2.CHECK SECURITY INDICATOR LAMP
1. Lock doors using keyfob or mechanical key.
2. Check that security indicator lamp illuminates for 30 seconds.
Does the security indicator lamp illuminate?
YES - GO TO 3.
NO - Perform diagnosis and repair. Without Intelligent Key System.
3.CHECK ALARM FUNCTION
1. After 30 seconds, security indicator lamp will start to blink.
2. Open any door before unlocking with keyfob or mechanical key, or open back door or glass hatch without keyfob.
Does the alarm function properly?
YES - GO TO 4.
NO - Check the following.
- The vehicle security system does not phase in alarm mode. Symptom Table Without Intelligent Key System.
- Alarm (horn and headlamps) does not operate. Symptom Table Without Intelligent Key System.
4.CHECK ALARM CANCEL OPERATION
Unlock any door using keyfob or mechanical key.
Does the alarm (horn and headlamps) stop.
YES - Inspection End.
- Check door lock function. System Diagram Without Intelligent Key System System Description Without Intelligent Key System, "DOOR LOCK AND UNLOCK SWITCH : System
NO
Description".