Interior Illumination

ILLUMINATION


Removal and Installation


ILLUMINATION CONTROL SWITCH

Removal





The illumination control switch (1) is replaced as a part of the combination meter assembly. Service and Repair.

Installation
Installation is in the reverse order of removal.

CARGO LAMP

Removal





1. Using a suitable tool (A), release the pawls and remove the cargo lamp lens (1).
: Pawl
2. Remove cargo lamp screws (2).
3. Disconnect the connector, then remove cargo lamp.

Installation
Installation is in the reverse order of removal.

Bulb Replacement





1. Using a suitable tool, release the pawls and remove the cargo lamp lens.
2. Release the cargo lamp bulb retainers (1), then pull bulb (2) straight out to remove.






CONSOLE ILLUMINATION LAMP

Bulb Replacement
1. Remove overhead console. Service and Repair.





2. Rotate console illumination lamp bulb (1) counterclockwise, then pull straight out away from front room/map lamp assembly (2) to remove.