Intake Valve Timing Control Position Sensor (LH)

INTAKE VALVE TIMING CONTROL


Intake Valve Timing Control Position Sensor (LH)


REMOVAL
1. Remove engine room cover using power tool. Service and Repair.
2. Remove air duct and resonator assembly. Removal And Installation.
3. Disconnect intake valve timing control position sensor connector (LH).





4. Remove intake valve timing control position sensor (LH) (1) and
O-ring (2) from Intake valve timing control solenoid valve cover
(LH) (3).

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Replace the O-ring for the intake valve timing control position sensor with a new one, then lubricate Oring with engine oil before installing.