Special Repair Requirement

INSPECTION AND ADJUSTMENT


CONFIGURATION : Special Repair Requirement

1. WRITING VEHICLE SPECIFICATION
Perform "WRITE CONFIGURATION" with CONSULT-III.
When writing saved data-GO TO 2
When writing manually-GO TO 3
2. PERFORM "WRITE CONFIGURATION - CONFIG FILE"
Perform "WRITE CONFIGURATION - Config file" with CONSULT-III.
- Work End.
3. PERFORM "WRITE CONFIGURATION - MANUAL SELECTION"
For "WRITE CONFIGURATION - Manual selection", using the following flow chart, identify the correct model and configuration list.
Confirm and/or change setting value for each item according to the configuration list.
Depending on CONSULT-III software version being used, some or all of the write configuration items shown in the following configuration lists may be displayed. If an item does not display on the CONSULT-III "WRITE
CONFIGURATION - Manual selection" screen, then it is an auto setting item and it cannot be manually set or changed.






NOTE:
Confirm vehicle model. Model Variation.
- Work End.