Keyfob Battery And Function

KEYFOB BATTERY AND FUNCTION





Description
The following functions are available when having and carrying electronic ID.
- Door lock/unlock
- Panic alarm
Remote control entry function and panic alarm function are available when operating the remote buttons.




Component Function Check
1.CHECK FUNCTION
With CONSULT-III
Check keyfob by pressing the keyfob lock and unlock buttons then monitoring KEYLESS LOCK, KEYLESS
UNLOCK in Data Monitor mode with CONSULT-III.





Is the inspection result normal?
YES - Keyfob is OK.
NO - SEE Diagnosis Procedure.




Diagnosis Procedure
1.CHECK KEYFOB BATTERY





Check by connecting a resistance (approximately 300Ohm(s)) so that the current value becomes about 10 mA.






Is the measurement value within specification?
YES - GO TO 2
NO - Replace Keyfob battery.
2.CHECK KEYFOB FUNCTION





Check keyfob function using Remote Keyless Entry Tester J-43241.
Does the test pass?
YES - Keyfob is OK.
NO - Replace keyfob. Refer to CONSULT-III Operation Manual.




Component Inspection
1. REPLACE KEYFOB BATTERY





Check keyfob operation after replacing the battery.
Is the inspection result normal?
YES - Keyfob is OK.
NO - Check remote keyless entry receiver. Remote Keyless Entry Receiver.




Special Repair Requirement
Refer to CONSULT-III Operation Manual.