Front RH

DOOR LOCK ACTUATOR:_:FRONT RH





Description
Locks/unlocks the door with the signal from BCM.




Component Function Check
1.CHECK FUNCTION
1. Use CONSULT-III to perform Active Test DOOR LOCK.
2. Touch "ALL LCK" or "ALL ULK" to check that it works normally.
Is the inspection result normal?
YES - Door lock actuator is OK.
NO - SEE Diagnosis Procedure.




Diagnosis Procedure
Regarding Wiring Diagram information, Wiring Diagram - King Cab or Wiring Diagram - Crew Cab.
1.CHECK DOOR LOCK ACTUATOR SIGNAL





Check voltage between BCM connector M20 terminals 65, 66 and ground.





Is the inspection result normal?
YES - GO TO 2
NO - Replace BCM. Service and Repair.
2.CHECK DOOR LOCK ACTUATOR HARNESS
1. Disconnect BCM and door lock actuator RH.





2. Check continuity between BCM connector M20 terminals 65, 66 and front door lock actuator RH terminals 2, 3.





3. Check continuity between BCM connector M20 terminals 65, 66 and ground.





Is the inspection result normal?
YES - Replace front door lock actuator RH. Removal And Installation.
NO - Repair or replace harness.