Sliding Motor

SLIDING MOTOR





Description
- The sliding motor LH is installed to the power seat frame assembly.
- The sliding motor LH is installed with the driver seat control unit.
- The seat is slid forward/backward by changing the rotation direction of sliding motor LH.




Component Function Check
1. CHECK FUNCTION
1. Select "SEAT SLIDE" in "Active test" mode with CONSULT-III.
2. Check the sliding motor LH operation.





Is the operation of relevant parts normal?
YES - Inspection End.
NO - Perform diagnosis procedure. SEE Diagnosis Procedure.




Diagnosis Procedure
Regarding Wiring Diagram information, Electrical Diagrams.
1. CHECK SLIDING MOTOR LH POWER SUPPLY





1. Turn the ignition switch OFF.
2. Perform "Active test" ("SEAT SLIDE") with CONSULT-III
3. Check voltage between driver seat control unit harness connector and ground.






Is the inspection result normal?
YES - Replace sliding motor LH. (Built in power seat frame assembly). Overhaul.
NO - GO TO 2
2. CHECK SLIDING MOTOR LH CIRCUIT





1. Disconnect driver seat control unit and sliding motor LH.
2. Check continuity between driver seat control unit harness connector and sliding motor LH harness connector.





3. Check continuity between driver seat control unit harness connector and ground.





Is the inspection result normal?
YES - GO TO 3
NO - Repair or replace harness.
3. CHECK INTERMITTENT INCIDENT
Intermittent Incident.
Is the inspection result normal?
YES - Replace driver seat control unit. Service and Repair.
NO - Repair or replace the malfunctioning part.