Operation CHARM: Car repair manuals for everyone.

Compressor HVAC: Service and Repair





COMPRESSOR


Removal and Installation for Compressor

A/C Compressor Mounting






REMOVAL
1. Discharge the refrigerant. HFC-134A (R-134A) Service Procedure .
2. Remove the left wheel and tire assembly. Service and Repair.
3. Remove the engine under cover.
4. Remove the front left fender protector.
5. Remove the engine air cleaner and air ducts. Removal And Installation .
6. Remove the drive belt. Removal and Replacement .
7. Disconnect the compressor electrical connector.
8. Disconnect the high-pressure flexible hose and low-pressure flexible hose from the compressor.

CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
9. Disconnect the compressor electrical connector.
10. Remove the compressor.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Replace the O-ring of the low-pressure flexible hose and high-pressure flexible hose with a new one, apply compressor oil to them when installing them.
- After recharging the A/C system with refrigerant, check for leaks.