Interior Room Lamp

INTERIOR ROOM LAMP


Removal and Installation


FRONT ROOM/MAP LAMP (If Equipped)

Removal
The front room/map lamp is replaced as part of the front roof console. Service and Repair.

Installation
Installation is in the reverse order of removal.

Bulb or Lens Replacement





1. Using a suitable tool (A), remove front room/map lamp lens (1).
Broken Circle indicates Pawl

CAUTION:
Wrap a cloth around suitable tool (A) to protect the housing and lens (1).
2. Release one side of the bulb (2) from the tab, then pull straight downward to remove.






ROOM LAMP (If Equipped)

Removal





1. Using a suitable tool (A), release the pawls and remove the room lamp lens (1).
Broken Circle indicates Pawl
2. Remove room lamp screws (2).
3. Disconnect the connector, then remove the room lamp.

Installation
Installation is in the reverse order of removal.

Bulb or Lens Replacement





1. Using a suitable tool, release the pawls and remove the room lamp lens.
2. Release the room lamp bulb retainers (1), then pull bulb (2) straight out to remove.






VANITY LAMP (If Equipped)

Removal
The vanity lamp is replaced as part of the sunvisor assembly. Service and Repair.

Installation
Installation is in the reverse order of removal.

Bulb or Lens Replacement





1. Using a suitable tool (A), release the tabs and remove the vanity lamp lens (1).
Broken Circle indicates Pawl

CAUTION:
Wrap a cloth around suitable tool (A) to protect the housing and lens.
2. Release one side of the bulb (2) from the tab, then pull straight out to remove.







STEP LAMP (If Equipped)

Removal










1. Insert a suitable tool between door finisher and step lamp lens/socket to release the pawls.

CAUTION:
Wrap a cloth around the suitable tool to protect door finisher and lens.
2. Disconnect the step lamp connector, then remove step lamp.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove the step lamp lens/socket.
2. Pull the bulb straight out to remove.






PERSONAL LAMP (If Equipped)

Removal





1. Remove the rear roof console. Service and Repair.
2. Remove personal lamp screws (3).
3. Disconnect personal lamp electrical connectors (1), then remove personal lamp (2) from the rear roof console.

Installation
Installation is in the reverse order of removal.

Bulb Replacement





1. Using a suitable tool (A), release the pawls and remove personal lamp lens (1).
Broken Circle indicates Pawl

CAUTION:
Wrap a cloth around suitable tool (A) to protect the housing and lens (1).
2. Pull bulb (2) straight out to remove.






FOOT LAMP (If Equipped)

Removal





Rotate foot lamp socket (3) counterclockwise to remove from bracket.
- Bulb shield (1)
- Bulb (2)

Installation
Installation is in the reverse order of removal.

Bulb Replacement





1. Release the pawls and remove bulb shield (1) from bracket.
2. Pull bulb (2) straight out from foot lamp socket (3) to remove.