Procedure After Replacing ECM

INSPECTION AND ADJUSTMENT


Procedure After Replacing ECM

When replacing ECM, the following procedure must be performed.
1. Perform initialization of NVIS (NATS) system and registration of all NVIS (NATS) ignition key IDs. Special Repair Requirement.
2. Perform VIN Registration.
3. Perform Accelerator Pedal Released Position Learning.
4. Perform Throttle Valve Closed Position Learning.
5. [Flexible Fuel Vehicle]
Perform Ethanol Mixture Ratio Adaptation (Flexible Fuel Vehicle).
6. Perform Idle Air Volume Learning.