Work Flow

DIAGNOSIS AND REPAIR WORK FLOW


Work Flow


OVERALL SEQUENCE











DETAILED WORK FLOW
1.CUSTOMER INFORMATION
Get detailed information from the customer about the symptom.
- GO TO 2
2.PRELIMINARY CHECK
Perform preliminary check. Trouble Diagnosis Introduction.
- GO TO 3
3.TECHNICAL SERVICE BULLETINS
Check for technical service bulletins.
- GO TO 4
4.USER MODE
Perform self-diagnosis using the AIR BAG warning lamp in User mode. Component Tests and General Diagnostics.
- GO TO 5
5.SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Trouble Diagnosis With CONSULT-III (w/CONSULT-III) or Trouble Diagnosis Without CONSULT-III (w/o CONSULT- III).
- GO TO 6
6.REPLACE PART
Replace the malfunctioning part.
- GO TO 7
7.FINAL CHECK
Check SRS using Diagnosis mode and User mode.
Does Diagnosis mode and User mode indicate SRS normal?
YES - Inspection end.
NO - GO TO 5