Removal And Installation

AIR CLEANER AND AIR DUCT


Removal and Installation


CAUTION:
Handle mass air flow sensor with care.
- Do not shock it.
- Do not disassemble it.
- Do not touch its sensor.

NOTE:
Add marks as necessary for easier installation.

REMOVAL
1. Disconnect the harness connector from air cleaner case (upper).
2. Disconnect crankcase ventilation hose.
3. Remove the air duct and resonator assembly and air cleaner case (upper).
4. Remove air cleaner filter and air cleaner case (lower).

INSPECTION AFTER REMOVAL
Inspect air duct and resonator assembly for cracks or tears.
- If anything found, replace air duct and resonator assembly.

INSTALLATION
Installation is in the reverse order of removal.