Auxiliary Power Outlet: Service and Repair

POWER SOCKET


Front, Console, or Rear Cargo Power Socket


POWER SOCKET

NOTE:
If the tool does not fit because of the location of the power socket, further disassembly may be required. Cluster Lid C (Front), Disassembly And Assembly (Console), or Removal And Installation, "Removal and Installation" (Rear Cargo).

Removal
1. Remove the fuse for the power socket.





2. Insert one end of the Tool (A) into one of the square holes inside the power socket.






3. Lift up the handle of the Tool until the other end of the Tool is inside the socket and snaps into the other square hole in the power socket.
4. Pull the power socket straight out with the Tool.





5. Disconnect power socket connector.
6. Remove ring from power socket finisher while pressing pawls.

Installation





Installation is in the reverse order of removal.

NOTE:
Make sure to align the tab with the square notched area during installation.