Lighting and Horns: Service and Repair

ILLUMINATION


Removal and Installation


ILLUMINATION CONTROL SWITCH

Removal





The illumination control switch is replaced as a part of the combination meter assembly. Service and Repair.

Installation
Installation is in the reverse order of removal.

GLOVE BOX LAMP

Removal
1. Remove instrument lower panel RH and glove box. Removal And Installation.





2. Rotate glove box lamp socket (3) with bulb (1) counterclockwise, then pull away from lamp shield (2) on steering member to remove.
Arrow Indicates Vehicle front

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove glove box lamp.





2. Pull bulb (2) straight out from glove box lamp socket (1) to remove.






CARGO LAMP

Removal





1. Using a suitable tool (A), release the pawls and remove the cargo lamp lens (1).
Broken Circle Indicates Pawl

CAUTION:
Wrap a cloth around suitable tool to protect the housing and lens.
2. Remove cargo lamp screws (2).
3. Disconnect the connector, then remove cargo lamp.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Using a suitable tool, release the pawls and remove the cargo lamp lens.





2. Release the cargo lamp bulb retainers (1), then pull bulb (2) straight out to remove.






A/T FINISHER LAMP

Removal
1. Remove A/T finisher from center console. A/T Finisher.





2. Rotate A/T finisher lamp socket (2) with bulb (3) counterclockwise, then pull away from finisher (1).

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove A/T finisher from center console. A/T Finisher.





2. Remove A/T finisher lamp socket (1), then pull bulb (2) straight out away from socket.