Cruise Test - Part 3

ROAD TEST


Cruise Test - Part 3

1.CHECK SHIFT-DOWN
1. Confirm overdrive control switch is ON position.
2. Confirm gear selector lever is in "D" position.
3. Accelerate vehicle using half-throttle to D5.
4. Release accelerator pedal.
5. Set overdrive control switch to OFF position while driving in D5.
With CONSULT-III
Read the gear position.
Does A/T shift from D5 to D4 (O/D OFF)?
YES - GO TO 2.
NO - Record the malfunction, GO TO 2.
2.CHECK SHIFT-DOWN
During D4 driving, move gear selector from D to 3 to 2 to 1.
With CONSULT-III
Read the gear position.
Is downshifting correctly performed?
YES - GO TO 3.
NO - Record the malfunction, GO TO 3.
3.CHECK ENGINE BRAKE
Check engine brake.
Does engine braking effectively reduce speed in 11 position?
YES - 1. Stop the vehicle.
2. Carry out the self-diagnostics. Diagnosis System (TCM).
NO - Record the malfunction, then continue the trouble diagnosis.