Operation CHARM: Car repair manuals for everyone.

With Intelligent Key System




U1010 CONTROL UNIT (CAN)

Description

CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern vehicle is equipped with many electronic control unit, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN-H line, CAN-L line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Signal Chart, CAN Communication Signal Chart.


DTC Logic


DTC DETECTION LOGIC








Diagnosis Procedure


1. REPLACE INTELLIGENT KEY UNIT

When DTC [U1010] is detected, replace Intelligent Key unit.
- Replace Intelligent Key unit. Service and Repair.


Special Repair Requirement


1. REQUIRED WORK WHEN REPLACING INTELLIGENT KEY UNIT

Initialize control unit. Refer to CONSULT Operation Manual.
- Inspection End.