ASCD Indicator

ASCD INDICATOR

Component Description

The ASCD operation status is indicated by two indicators (CRUISE and SET on the information display) on the combination meter.
CRUISE indicator is displayed to indicated that ASCD system is ready for operation when MAIN switch on
ASCD steering switch is turned ON.
SET indicator is displayed when the following conditions are met.
- CRUISE indicator is displayed.
- SET/COAST switch on ASCD steering switch is turned ON while vehicle speed is within the range of the
ASCD setting.
SET indicator is displayed during ASCD control.
Refer to the ASCD function.


Diagnosis Procedure


1. CHECK OVERALL FUNCTION

Check ASCD indicator under the following conditions.





OK or NG
OK-INSPECTION END
NG- GO TO 2.

2. CHECK DTC

Check that DTC UXXXXX is not displayed.
OK or NG
OK- GO TO 3.
NG- Perform trouble diagnosis for DTC UXXXX.

3. CHECK COMBINATION METER FUNCTION

CONSULT Function (Meter/M&A).
OK or NG
OK- GO TO 4.
NG- Go to Service and Repair.

4. CHECK INTERMITTENT INCIDENT

How to Check Terminal and Intermittent Incident.
-INSPECTION END