Removal and Replacement

HEADLAMP

Removal and Installation


COMBINATION LAMP ASSEMBLY (FRONT)

Removal

WARNING:
To prevent burns, never touch the glass surface of the bulb with bare hands because the surface is very hot just after the lamp is turned OFF.

CAUTION:
- After installing the bulb, install the back cover and the bulb socket securely for watertightness.
- Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to the bulb.
- Leaving the bulb removed from housing for a long period of time can deteriorate performance of the lens and reflector (causing dirt or clouding). Always prepare a new bulb and have it on hand when replacing the bulb.
1.Partially remove fender protector (forward edge), Service and Repair.
2.Remove front grille, Service and Repair.





3.Remove the bolts (A), disconnect the electrical connector, and remove the front combination lamp assembly (1).
Installation
Installation is in the reverse order of removal.