Procedure After Replacing ECM

INSPECTION AND ADJUSTMENT

Procedure After Replacing ECM

When replacing ECM, the following procedure must be performed.
1.Perform initialization of NVIS(NATS) system and registration of all NVIS(NATS) ignition key IDs. Refer to
With Intelligent Key System (With intelligent key system) or Without Intelligent Key System (Without intelligent key system).
2.Perform VIN Registration.
3.Perform Accelerator Pedal Released Position Learning.
4.Perform Throttle Valve Closed Position Learning.
5.
Perform Ethanol Mixture Ratio Adaptation (Flexible Fuel Vehicle).
6.Perform Idle Air Volume Learning.