Intake Valve Timing Control Position Sensor (LH)

INTAKE VALVE TIMING CONTROL

Intake Valve Timing Control Position Sensor (LH)


REMOVAL

1.Remove engine room cover using power tool. Service and Repair.
2.Remove air duct and resonator assembly. Removal And Installation.
3.Disconnect intake valve timing control position sensor connector (LH).





4.Remove intake valve timing control position sensor (LH) (1) and
O-ring (2) from Intake valve timing control solenoid valve cover (LH) (3).

CAUTION:
Do not reuse O-ring.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Lubricate O-ring with engine oil before installing.
- Do not reuse O-ring.

Intake valve timing control position sensor bolt: 9.0 Nm (0.92 kg-m, 80 in-lb)