Diagnosis Procedure

DOOR SWITCH

CREW CAB : Diagnosis Procedure

Regarding Wiring Diagram information, Wiring Diagram - Crew Cab.

1. CHECK DOOR SWITCHES INPUT SIGNAL

With CONSULT
Check door switches ("DOOR SW-DR", "DOOR SW-AS", "DOOR SW-RL", "DOOR SW-RR") in DATA MONITOR mode with CONSULT. Door Lock.
- When doors are open:
DOOR SW-DR :ON
DOOR SW-AS :ON
DOOR SW-RL :ON
DOOR SW-RR :ON

- When doors are closed:
DOOR SW-DR :OFF
DOOR SW-AS :OFF
DOOR SW-RL :OFF
DOOR SW-RR :OFF

Without CONSULT
Check voltage between BCM connector M18 or M19 terminals 12, 13, 47, 48 and ground.










Is the inspection result normal?
YES- Door switch circuit is OK.
NO- GO TO 2

2. CHECK DOOR SWITCH CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect door switch and BCM.
3.Check continuity between door switch connector B8 (Front LH), B108 (Front RH), B18 (Rear LH), B116
(Rear RH) terminal 2 and BCM connector M18, M19 terminals 12, 13, 47 and 48.





2 - 47 :Continuity should exist
2 - 12 :Continuity should exist
2 - 48 :Continuity should exist
2 - 13 :Continuity should exist

4.Check continuity between door switch connector B8 (Front LH), B108 (Front RH), B18 (Rear LH), B116 (Rear RH) terminal 2 and ground.
2 - Ground:Continuity should not exist
Is the inspection result normal?
YES- GO TO 3
NO- Repair or replace harness.

3. CHECK DOOR SWITCHES






Check continuity between door switch terminal 2 and exposed metal of switch while pressing and releasing switch.





Is the inspection result normal?
YES- Check door switch case ground condition.
NO- Replace door switch.