Component Function Check

HEADLAMP (HI) CIRCUIT

Component Function Check


1. CHECK HEADLAMP (HI) OPERATION

WITHOUT CONSULT
1.Start IPDM E/R auto active test. Diagnosis Description.
2.Check that the headlamp switches to the high beam.
NOTE:
HI/LO is repeated 1 second each when using the IPDM E/R auto active test.
WITH CONSULT
1.Select "EXTERNAL LAMPS" of IPDM E/R active test item.
2.With the test item operating, check that the headlamp switches to high beam.
HI: Headlamp switches to the high beam.
OFF: Headlamp OFF

Does the headlamp switch to high beam?
YES- Headlamp (HI) circuit is normal.
NO- Without Daytime Light System, "Diagnosis Procedure - With Daytime Light System".