Removal And Installation

AIR CLEANER AND AIR DUCT

Removal and Installation


CAUTION:
Handle mass air flow sensor with care.
- Do not shock it.
- Do not disassemble it.
- Do not touch its sensor,

REMOVAL

NOTE:
Add marks as necessary for easier installation.
1.Remove the engine room cover, if equipped. Service and Repair.
2.Disconnect the harness connector from air cleaner case (upper).
3.Disconnect crankcase ventilation hoses at resonator.
4.Remove the air duct and resonator assembly and air cleaner case (upper).
5.Remove air cleaner filter and air cleaner case (lower).

INSPECTION AFTER REMOVAL

Inspect air duct, resonator assembly, and air cleaner case for cracks or tearing.
- Replace air duct and resonator assembly as necessary.

INSTALLATION

Installation is in the reverse order of removal.