With Navigation

POWER SUPPLY AND GROUND CIRCUIT

DVD PLAYER : Diagnosis Procedure

Regarding Wiring Diagram information, With Navigation.

1. CHECK FUSE

Check that the following fuses for the DVD player are not blown.





Is the fuse OK?
YES- GO TO 2.
NO- If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse.

2. POWER SUPPLY CIRCUIT CHECK






1.Disconnect DVD player connector M205.
2.Check voltage between the DVD player connector M205 and ground.





Are the voltage results as specified?
YES- GO TO 3.
NO- - Check connector housings for disconnected or loose terminals.
- Repair harness or connector.

3. GROUND CIRCUIT CHECK






1.Turn ignition switch OFF.
2.Disconnect DVD player connector M206.
3.Check continuity between DVD player harness connector M206
terminal 22 and ground.





Are the continuity results as specified?
YES- Inspection End.
NO- Repair DVD player ground.