Fog/Driving Lamp: Service and Repair

FRONT FOG LAMP

Removal and Installation


FRONT FOG LAMP

Removal

WARNING:
To prevent burns, never touch the glass surface of the bulb with bare hands because the surface is very hot just after the lamp is turned OFF.

CAUTION:
- Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to the bulb.
- Leaving the bulb removed from housing for a long period of time can deteriorate performance of the lens and reflector (causing dirt or clouding). Always prepare a new bulb and have it on hand when replacing the bulb.
1.Disconnect the electrical harness connector from socket (1).





2.Remove the bolts (A), and remove the fog lamp assembly (2).
Installation
Installation is in the reverse order of removal.