Charging System Preliminary Inspection

CHARGING SYSTEM PRELIMINARY INSPECTION

Inspection Procedure


1. CHECK BATTERY TERMINALS CONNECTION

Check if battery terminals are clean and tight.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair battery terminals connection.

2. CHECK FUSE

Check for blown fuse and fusible link.





Is the inspection result normal?
YES- GO TO 3.
NO- Be sure to eliminate cause of malfunction before installing new fuse or fusible link.

3. CHECK GENERATOR GROUND TERMINAL CONNECTION

Verify connector E206 terminal 5 (generator ground harness) is clean and tight.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair connection.

4. CHECK DRIVE BELT TENSION

Check drive belt tension. Procedures.
Is the inspection result normal?
YES- Inspection End.
NO- Repair as needed.