Base Audio

AUDIO ANTENNA

Removal and Installation


REMOVAL

1.Remove lower glove box. Removal And Installation.
2.Remove audio unit. (Type 1) or (Type 2).
3.Disconnect audio antenna cable from antenna feeder.
4.Remove antenna rod.
5.Remove rubber seal.
6.Remove cowl top. Service and Repair.
7.Remove front fender protector. Service and Repair.
8.Remove antenna base bolts.
9.Remove antenna base and cable.






INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
Always properly tighten the antenna rod during installation or the antenna rod may bend or break during vehicle operation.