Lighting and Horns: Service and Repair

ILLUMINATION

Removal and Installation


ILLUMINATION CONTROL SWITCH

Removal





The illumination control switch is replaced as a part of the combination meter assembly. Service and Repair.
Installation
Installation is in the reverse order of removal.

CARGO LAMP

Removal





1.Using a suitable tool (A), release the pawls and remove the cargo lamp lens (1).
Broken circle indicates : Pawl

CAUTION:
Wrap a cloth around suitable tool to protect the housing and lens.
2.Remove cargo lamp screws (2).
3.Disconnect the connector, then remove cargo lamp.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1.Using a suitable tool, release the pawls and remove the cargo lamp lens.





2.Release the cargo lamp bulb retainers (1), then pull bulb (2)
straight out to remove.
Cargo lamp bulb: 12V - 8W

A/T FINISHER LAMP

Removal
1.Remove A/T finisher from center console. A/T Finisher.





2.Rotate A/T finisher lamp socket (2) with bulb (3) counterclockwise, then pull away from finisher (1).
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1.Remove A/T finisher from center console. A/T Finisher.





2.Remove A/T finisher lamp socket (1), then pull bulb (2) straight out away from socket.
A/T finisher lamp bulb: 12V - 3W

IGNITION KEYHOLE ILLUMINATION LAMP

Removal
1.Partially remove LH front door welt and position aside. Removal And Installation.
2.Remove front pillar lower finisher. Removal And Installation.
3.Remove instrument lower panel LH. Instrument Lower Panel LH.
4.Partially remove the BCM and position aside.
5.Remove ignition keyhole illumination lamp.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1.Remove keyhole illumination lamp.





2.Pull bulb (2) straight out from keyhole illumination lamp socket (1) to remove.