Cabin Temperature Sensor / Switch: Service and Repair

INTAKE SENSOR

Removal and Installation


REMOVAL

1.Remove the front kick plate. Removal And Installation.
2.Remove the front pillar upper finisher. Removal And Installation.
3.Remove the upper glove box. Upper Glove Box.





4.Disconnect the intake sensor electrical connector.
NOTE:
The intake sensor is located on the top of the front heater and cooling unit assembly next to the A/C evaporator cover.
5.Twist the intake sensor to remove the intake sensor from the front heater and cooling unit assembly.

INSTALLATION

Installation is in the reverse order of removal.