Crankshaft Main Bearing

SERVICE DATA AND SPECIFICATIONS (SDS)


MAIN BEARING







Undersize
Unit: mm (in)





Main Bearing Oil Clearance
Unit: mm (in)








Main Bearing Cap Torque and Sequence

Tighten lower cylinder block as follows:

Apply new engine oil to threads and seat surfaces of the bolts.






Tighten M8 bolts in numerical order as shown from No. 17 to 24.






NOTE: There are more processes to complete the tightening bolts. However stop procedure here to install rear oil seal.

Restart tightening of lower cylinder block bolts as follows:






Tighten M10 bolts in numerical order as shown from No. 1 to 16.

NOTE: Use TORX socket (size E14) for bolts No. 1 to 16 (M10 bolt).










Turn M10 bolts 90� clockwise in numerical order from No. 1 to 16 using Tool.

Tool number: KV-10112100 (BT-8653-A)