Control Unit: Service and Repair

DIFFERENTIAL LOCK CONTROL UNIT

Removal and Installation


REMOVAL

1.Disconnect the battery negative terminal. Removal and Replacement.
2.Remove the instrument lower panel LH. Instrument Lower Panel LH.





3.Disconnect the differential lock control unit connector.
4.Remove the two bolts and remove the differential lock control unit.

INSTALLATION

Installation is in the reverse order of removal.
- When installing differential lock control unit, tighten bolts to the specified torque.
Differential lock control unit bolts: 5.1 Nm (0.52 kg-m, 45 in-lb)
- After the installation, check DIFF LOCK indicator lamp. Precaution For Servicing Rear Final Drive.