Rear Power Window Switch

REAR POWER WINDOW SWITCH

Removal and Installation - Rear Door Switch


REMOVAL






1.Using a suitable tool, release the metal clip and pawls, then lift the rear power window switch and finisher (2) upward as an assembly from the rear door finisher.
Broken circle indicates : Pawl
Broken square indicates : Metal clip

CAUTION:
Wrap a cloth around suitable tool to protect components from damage.
2.Disconnect the harness connectors, then remove the assembly from the door finisher.
3.Release the two tabs (A), one on either side, then separate the rear power window switch (1) from the switch finisher (2).

INSTALLATION

Installation is in the reverse order of removal.