Bose Audio

DIAGNOSIS SYSTEM (AROUND VIEW MONITOR CONTROL UNIT)

CONSULT Function


APPLICATION ITEMS

CONSULT can display each diagnostic item using the diagnostic test modes shown as follows:






ECU IDENTIFICATION

Displays the part number of around view monitor control unit.

SELF-DIAGNOSTIC RESULTS

For details, refer to "DTC Index" Testing and Inspection.

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.






WORK SUPPORT











Calibrating Camera Image (front camera, pass-side camera, dr-side camera, and rear camera)





Perform the calibration of camera image caused by the incorrect mounting position of each camera, etc. Always perform calibration after performing the following work.
- When each camera or each camera mount (e.g. front grille, door mirror, and others) is removed
- When replacing the around view monitor control unit
Refer to "Work Procedure" Bose Audio for the calibration procedure.





Initialize Camera Image Calibration
The calibration can be initialized to NISSAN factory shipment condition.
Predictive Course Line Display
ON/OFF setting of predictive course line can be performed.
Steering Angle Sensor Adjustment
Steering angle sensor neutral position can be adjusted and registered.

CAUTION:
For vehicles with VDC, adjust the steering angle sensor neutral position on the ABS actuator control unit side.
Non-Viewable Area Reminder
ON/OFF setting of the non-viewable area reminder can be performed.