Pinout Values and Diagnostic Parameters

BCM (BODY CONTROL MODULE)

Reference Value


VALUES ON THE DIAGNOSIS TOOL

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.





















TERMINAL LAYOUT







PHYSICAL VALUES


CAUTION:
- Check combination switch system terminal waveform under the loaded condition with lighting switch, turn signal switch and wiper switch OFF is not to be fluctuated by being overloaded.
- Turn wiper intermittent dial position to 4 except when checking waveform or voltage of wiper intermittent dial position. Wiper intermittent dial position can be confirmed on CONSULT. Refer to BCS26, "COMB SW : CONSULT Function (BCM - COMB SW)".
- BCM reads the status of the combination switch at 10 ms internal normally. Refer to "System Diagram" System Diagram.