Diagnosis Procedure

OUTSIDE KEY ANTENNA

DRIVER SIDE : Diagnosis Procedure


1. CHECK OUTSIDE KEY ANTENNA INPUT SIGNAL

1.Turn ignition switch OFF.
2.Disconnect outside handle assembly (driver side) connector.
3.Check signal between outside handle assembly (driver side) harness connector and ground with oscilloscope.





Is the inspection result normal?
YES- Replace Intelligent Key unit. Refer to "Removal and Installation" Removal And Installation.
NO- GO TO 2.

2. CHECK OUTSIDE KEY ANTENNA CIRCUIT

1.Disconnect Intelligent Key unit connector.
2.Check continuity between Intelligent Key unit harness connector and outside handle assembly (driver side) harness connector.





3.Check continuity between Intelligent Key unit harness connector and ground.





Is the inspection result normal?
YES- Replace Intelligent Key unit. Refer to "Removal and Installation" Removal And Installation.
NO- Repair or replace harness.