With Intelligent Key System

KEY CYLINDER SWITCH

Description

Power window main switch detects condition of the door key cylinder switch and transmits to BCM as the
LOCK or UNLOCK signals.


Component Function Check


1. CHECK DOOR KEY CYLINDER SWITCH INPUT SIGNAL

Check ("KEY CYL LK-SW", "KEY CYL UN-SW") in "DATA MONITOR" mode for "POWER DOOR LOCK SYSTEM" with CONSULT. Refer to "DOOR LOCK : CONSULT Function (BCM DOOR LOCK)" With Intelligent Key System.





Is the inspection result normal?
YES- Key cylinder switch is OK.
NO- Refer to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK DOOR KEY CYLINDER SWITCH INPUT SIGNAL

1.Turn ignition switch ON.
2.Disconnect front door lock assembly (driver side) connector.
3.Check signal between front door lock assembly (driver side) harness connector and ground with oscilloscope.





Is the inspection result normal?
YES- GO TO 3.
NO- GO TO 2.

2. CHECK DOOR KEY CYLINDER SIGNAL CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect BCM connector.
3.Check continuity between BCM harness connector and front door lock assembly (driver side) harness connector.





4.Check continuity between BCM connector and ground.





Is the inspection result normal?
YES- Replace BCM. Refer to "Exploded View" Exploded View.
NO- Repair or replace harness.

3. CHECK DOOR KEY CYLINDER SWITCH GROUND CIRCUIT

Check continuity between front door lock assembly (driver side) connector and ground.





Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace harness.

4. CHECK DOOR KEY CYLINDER SWITCH

Check door key cylinder switch.
Refer to "Component Inspection" .
Is the inspection result normal?
YES- GO TO 5.
NO- Replace front door lock assembly (driver side). Refer to "DOOR LOCK : Removal and Installation" With Intelligent Key System.

5. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END


Component Inspection


COMPONENT INSPECTION


1. CHECK DOOR KEY CYLINDER SWITCH

Check front door lock assembly (driver side).










Is the inspection result normal?
YES- INSPECTION END
NO- Replace front door lock assembly (driver side). Refer to "DOOR LOCK : Removal and Installation" With Intelligent Key System.