Glass Mirror

DOOR MIRROR

GLASS MIRROR : Removal and Installation


REMOVAL

1.Remove glass mirror.






Broken triangle indicates : Pawl

a.Place the glass mirror upward.

CAUTION:
Apply a protective tape (B) on housing assembly to protect the surface from damage.
b.As shown in the figure, insert a remover tool (A) between glass mirror and actuator. Push up both pawls simultaneously to remove glass mirror lower half side.
NOTE:
Insert a remover tool into recesses, and push up while rotating (twisting) to make work easier.
c.Remove terminals of mirror heater attachment from glass mirror if equipped.
2.Lightly lift up lower side of glass mirror, and detach both pawls of upper side as if pulling it out to disassemble glass mirror from actuator.
NOTE:
Be careful not to allow grease on sealing agent in center of mirror or back side of glass mirror.

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:
After installation, visually check that pawls are securely engaged.