Removal And Installation

REAR SEAT

Removal and Installation


REMOVAL


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.Remove the seat cushion.





Pull seat cushion up, and then remove the seat cushion from the seat cushion hook.
2.Remove the seatback.
- Pull up the seatback trim.





- Remove the seatback center bracket mounting bolts (A).
- Remove the luggage finisher mask. Refer to "Removal and Installation" Removal And Installation.





- Remove the seatback side bracket mounting nuts (B).
- Remove the seatback assembly (RH/LH) from the vehicle.
3.Remove the seatback center bracket.
- Remove the luggage floor center finisher. Refer to "Removal and Installation" Removal And Installation.
- Remove the seatback center bracket mounting bolt.
- Remove the seatback center bracket from the vehicle.
4.Remove the seat striker.
- Remove the luggage side lower finisher. Refer to "Removal and Installation" Removal And Installation.
- Remove the seat striker mounting bolt.
- Remove the seat striker from the vehicle.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.