Removal And Installation

AIR CLEANER AND AIR DUCT

Removal and Installation


REMOVAL

NOTE:
Mass air flow sensor is removable under the car-mounted condition.
1.Remove air duct (inlet).
2.Remove battery. Refer to "Exploded View" Exploded View.





3.Disconnect harness connectors (A) and then remove bracket (1).
4.Disconnect mass air flow sensor harness connector.
5.Disconnect fresh air hose.
6.Remove air cleaner case and mass air flow sensor assembly, air duct and resonator assembly and air duct disconnecting their joints.
- Add marks if necessary for easier installation.
7.Remove mass air flow sensor from air cleaner case, if necessary.

CAUTION:
Handle the mass air flow sensor with the following cares.
- Never shock the mass air flow sensor.
- Never disassemble the mass air flow sensor.
- Never touch the sensor of the mass air flow sensor.

INSTALLATION

Note the following, and install in the reverse order of removal.
- Align marks. Attach each joint. Screw clamps firmly.