Removal And Installation

HORN

Removal and Installation


REMOVAL

Horn (LO)
1.Remove the front bumper fascia upper clips. And lift the front bumper fascia up and hold to keep a service area. Refer to "Exploded View" Exploded View.
2.Disconnect the horn (LO) connector.
3.Remove the horn mounting bolt, and remove the horn (LO) from the vehicle.
Horn (HI)
1.Remove the fender protector LH (front). Refer to "Exploded View" Exploded View.
2.Disconnect the horn (HI) connector.
3.Remove the horn mounting nut, and remove the horn (HI) from the vehicle.

INSTALLATION

Install in the reverse order of removal.