Wheel Alignment

WHEEL ALIGNMENT

Adjustment


TOE-IN

- Loosen the steering outer socket, and then adjust the length using steering inner socket.

Standard
Toe-in: Refer to "Wheel Alignment" Wheel Alignment.

CAUTION:
- Always evenly adjust both toe-in alternately and adjust the difference between the left and right to the standard.
- Always fix the steering inner socket when tightening the steering outer socket.
- After toe-in adjustment, adjust neutral position of steering angle sensor. (With VDC) Refer to "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION : Special Repair Requirement" Special Repair Requirement.