Removal And Installation

POWER WINDOW MAIN SWITCH

Removal and Installation


REMOVAL

1.Remove the power window main switch finisher (2).
Refer to "FRONT DOOR FINISHER : Exploded View" Exploded View and "FRONT DOOR FINISHER : Removal and Installation".





2.Power window main switch (1) is removed from power window main switch finisher (2) using remover tool (A).

Broken triangle indicates : Pawl

CAUTION:
Do not fold the pawl of power window main switch finisher.
NOTE:
The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH & RH).

INSTALLATION

Install in the reverse order of removal.
NOTE:
Power window main switch is exchanged or is detached it is necessary to do the initialization procedure.
Refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement" Special Repair Requirement.