Sport Mode Switch

SPORT MODE SWITCH

Component Function Check


1. CHECK SPORT MODE SWITCH FUNCTION

1.Start the engine.
2.Check that SPORT indicator lamp turns ON/OFF when SPORT mode switch is operated.
Is the inspection result normal?
YES- INSPECTION END.
NO- Go to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK DTC (TCM)

With CONSULT
1.Turn ignition switch ON.
2.Check "Self Diagnostic Results" in "TRANSMISSION".
Is any DTC detected?
YES- Check DTC detected item. Refer to "DTC Index" Testing and Inspection.
NO- GO TO 2.

2. CHECK DTC (ECM)

With CONSULT
Check "Self Diagnostic Results" in "ECM".
Is any DTC detected?
YES- Check DTC detected item. Refer to "DTC Index" Testing and Inspection.
NO- GO TO 3.

3. CHECK DTC (COMBINATION METER)

With CONSULT
Check "Self Diagnostic Results" in "METER/M&A".
Is any DTC detected?
YES- Check DTC detected item. Refer to "DTC Index" Testing and Inspection.
NO- GO TO 4.

4. CHECK COMBINATION METER

With CONSULT
1.Select "Data Monitor" in METER/M&A".
2.Select "SPORT MODE IND".
3.Check that "SPORT MODE IND" turns ON/OFF when SPORT mode switch is operated.
Is the inspection result normal?
YES- Replace the combination meter. Refer to "Removal and Installation" Removal And Installation.
NO- GO TO 5.

5. CHECK SPORT MODE SWITCH CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect SPORT mode switch connector.
3.Check the voltage between SPORT mode switch harness connector terminals.





Is the inspection result normal?
YES- GO TO 6.
NO- GO TO 7.

6. CHECK SPORT MODE SWITCH

Check the SPORT mode switch. Refer to "Component Inspection (Sport Mode Switch)" .
Is the inspection result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- Replace the SPORT mode switch. Refer to "Exploded View" Exploded View.

7. CHECK GROUND CIRCUIT

Check the continuity between SPORT mode switch harness connector terminal and ground.





Is the inspection result normal?
YES- GO TO 8.
NO- Repair or replace damaged parts.

8. CHECK HARNESS BETWEEN COMBINATION METER AND SPORT MODE SWITCH

1.Disconnect the combination meter connector.
2.Check the continuity between combination meter harness connector terminal and SPORT mode switch harness connector terminal.





Is the inspection result normal?
YES- GO TO 9.
NO- Repair or replace damaged parts.

9. CHECK HARNESS BETWEEN COMBINATION METER AND GROUND

Check continuity between combination meter harness connector terminal and ground.





Is the inspection result normal?
YES- GO TO 10.
NO- Repair or replace damaged parts.

10. CHECK COMBINATION METER INPUT/OUTPUT SIGNAL

1.Connect the all connectors.
2.Check the combination meter connector terminal 4. Refer to "Reference Value" Reference Value.
Is the inspection result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- Replace the combination meter. Refer to "Removal and Installation" Removal And Installation.


Component Inspection (Sport Mode Switch)


1. CHECK SPORT MODE SWITCH

Check the continuity between SPORT mode switch connector terminals.





Is the inspection result normal?
YES- INSPECTION END
NO- Replace the SPORT mode switch. Refer to "Exploded View" Exploded View.