Diagnosis Procedure

POWER WINDOW MOTOR

REAR LH : Diagnosis Procedure


1. CHECK REAR POWER WINDOW MOTOR LH INPUT SIGNAL

1.Turn ignition switch OFF.
2.Disconnect rear power window motor LH connector.
3.Turn ignition switch ON.
4.Check voltage between rear power window motor LH harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- GO TO 2.

2. CHECK REAR POWER WINDOW MOTOR LH CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect rear power window switch LH connector.
3.Check continuity between rear power window switch LH harness connector and rear power window motor
LH harness connector.





4.Check continuity between rear power window switch LH connector and ground.





Is the inspection result normal?
YES- Replace rear power window switch LH.Refer to "Removal and Installation" Removal And Installation.
NO- Repair or replace harness.

3. CHECK REAR POWER WINDOW MOTOR LH

Check rear power window motor LH.
Refer to "REAR LH : Component Inspection" Component Inspection.
Is the inspection result normal?
YES- GO TO 4.
NO- Replace rear power window motor LH. Refer to "Removal and Installation" Removal And Installation.

4. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END