Diagnosis Procedure

POWER WINDOW MOTOR

REAR RH : Diagnosis Procedure


1. CHECK REAR POWER WINDOW MOTOR RH INPUT SIGNAL

1.Turn ignition switch OFF.
2.Disconnect rear power window motor RH connector.
3.Turn ignition switch ON.
4.Check voltage between rear power window motor RH harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- GO TO 2.

2. CHECK REAR POWER WINDOW MOTOR RH CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect rear power window switch RH connector.
3.Check continuity between rear power window switch RH harness connector and rear power window motor
RH harness connector.





4.Check continuity between rear power window switch RH harness connector and ground.





Is the inspection result normal?
YES- Replace rear power window switch RH.Refer to "Removal and Installation" Removal And Installation.
NO- Repair or replace harness.

3. CHECK REAR POWER WINDOW MOTOR RH

Check rear power window motor RH.
Refer to "REAR RH : Component Inspection" Component Inspection.
Is the inspection result normal?
YES- GO TO 4.
NO- Replace rear power window motor RH. Refer to "Removal and Installation" Removal And Installation.

4. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END