Anti-Pinch System Does Not Operate Normally

ANTI-PINCH SYSTEM DOES NOT OPERATE NORMALLY (DRIVER SIDE)

Diagnosis Procedure


1. PERFORM INITIALIZATION PROCEDURE

Initialization procedure is executed and operation is confirmed.
Refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement" Special Repair Requirement.
Is the inspection result normal?
YES- INSPECTION END
NO- GO TO 2.

2. CHECK ENCODER CIRCUIT

Check encoder circuit.
Refer to "Component Function Check" Encoder Circuit.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- GO TO 1.